Workshop Tools

AST5299

Exhaust Camshaft Locking Tool - 1.2 GDi PureTech EB2 - Euro 6.3 / 6.4 - Citroën - Peugeot - DS - Opel/Vauxhall

AST5299 is specified for use as an exhaust camshaft setting tool on the 1.2 GDi ‘EB2’ petrol engine with Euro 6.3 and 6.4 variants.

The tool locates onto the exhaust camshaft through a small aperture in the aluminium camshaft casing, and is used in conjunction with the flywheel pin and inlet camshaft setting tool included within AST5255.

Note: Camshaft setting tools are not intended for use as a counter hold when removing and installing the camshaft sprocket bolts during belt replacement procedures.

For earlier variants of the EB2 engine see AST5255 and AST5148A.

Models
Engines

Citroën

  • 1.2 GDi PureTech
  • Berlingo IV
  • C3 Aircross
  • C3 IV
  • C4 Cactus
  • C4 III
  • C4 Space Tourer/Grand Space Tourer
  • C5 Aircross

Peugeot

  • 1.2 GDi PureTech
  • 2008
  • 208
  • 3008
  • 308
  • 5008
  • 508
  • Partner IV
  • Rifter

Vauxhall/Opel

  • 1.2 Turbo
  • Combo-E (X19)(18-)
  • Combo-E Life (X19)(18-)
  • Crossland X (P17)(17-)
  • Grandland X (A18)(17-)
  • EB2ADT
  • EB2ADTD
  • EB2ADTMD
  • EB2ADTS
  • EB2ADTSM

With this kit you will need:

Petrol 1.2 GDI PureTech EB2 Belt-in-Oil Engine Setting/Locking Kit - Citroën - Peugeot - DS - Opel/Vauxhall
AST5255

Petrol 1.2 GDI PureTech EB2 Belt-in-Oil Engine Setting/Locking Kit - Citroën - Peugeot - DS - Opel/Vauxhall

AST5255 contains the setting/locking tools required for engine valve timing applications on 1.2 GDi (direct injection) ‘EB’ series belt-in-oil (also known as wet belt) engines, installed in models across the Citroen-Peugeot range as well as in shared platform models from the Opel-Vauxhall range.

AST5255 provides a method of setting the crankshaft and camshaft position without the need to remove the aluminium camshaft casing and the fuel injection system from the engine. The inlet camshaft tool simply slots into position on the camshaft through an aperture in the aluminium camshaft casing, the exhaust camshaft tool locates in the rear of the camshaft in place of the vacuum pump.

The camshaft setting tools can be used to simply check the camshaft timing position. They may also be used to set the camshaft position during belt replacement procedures, however additional disassembly may be required to overcome the access limitations caused by the flanged edges of the camshaft sprockets. Additional engine disassembly may include the removal of the aluminium camshaft casing that provides the camshaft setting location.

Note: Camshaft setting tools are not intended for use as a counter hold when removing and installing the camshaft sprocket bolts during belt replacement procedures.

 Additional tool recommended for Euro 6.3 and Euro 6.4 variants, see AST5299.

 

Petrol 1.2 GDI PureTech EB2 Belt-in-Oil Engine Setting/Locking Kit - Citroën - Peugeot - DS - Opel/Vauxhall

OEM tool codes included in this kit:

  • 0109-2E

Enquire about this product

×

Product Information at Your Fingertips

Unlock Detailed Insights with QR Codes on Every Label

Discover the full potential of our products by accessing comprehensive information and user guides directly from your smartphone. Each product we offer comes with a QR code on the label, linking you to a wealth of information tailored to your needs.


How to Access Product Information

  1. Locate the QR Code on Your Product Label
    Each product comes with a unique QR code, prominently displayed on its label.
  2. Scan the QR Code with Your Smartphone
    Using your smartphone’s camera or a QR code reader app, simply point and scan. No additional software is required.
  3. View and Download the PDF
    After scanning, you’ll be redirected to a dedicated PDF file hosted on our website. From there, you can view, download, or share the information with ease.